Fixed Cycles on the Mill
VMS Forum | Library | Start Page | Previous Page| Next Page
WARNING: Machine tools present a safety hazard. Improper operation can result in severe injury. These topics are for non-laboratory study only and are not to be used in conjunction with the operation of any tool or machine described herein. Never use a machine tool without the supervision of a qualified instructor.

1: Overview A description of fixed cycles and why they are important. An example program using fixed cycles.

2: G Codes A listing of G codes used in common canned cycles.

3: Rules How words are used within a canned cycle. How to initiate and cancel them.

4: G73 Peck drilling cycle

5: G74 Left hand tapping.

6: G76 Fine boring

7: G81 Drilling

8: G82 Counter boring

9: G83 Deep hole peck drill

10: G84 Right hand tapping

11: G85 Reaming

12: G86 Boring

13: G89 Counter boring for boring bar

14: Rigid Tapping A short description

VMS Forum | Library | Start Page | Previous Page| Next Page

label: fixed cycles, G codes, words, canned cycles G73, G74, G76, G81, G82, G83, G84, G85, G86, G89